Tools/Maintenance

A purpose-built wrench designed for compression nuts, nipples, and other fittings found on hydraulic brake systems. The five-sided flare wrench head evenly spreads out the force being applied to the wrench, reducing the risk of damage to fasteners and brake hoses. Features a slim, low-profile design to access low-clearance fittings found on hydraulic levers and calipers. Built-in 3/8" fittings allow for use with a torque wrench to achieve proper torque. - Double-sided wrench features 7mm and 8mm wrench openings - Dimensions: 4" x 0.75" x 0.15" (101mm x 19.5mm x 4.5mm) - Weight: 44g (1.55 oz.) NOTE: When using with a torque wrench, the MWF-3 should be installed at a 90° angle from the beam of the wrench.

Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!

Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs

Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp: - 1002: fits 100-3X and 100-5X extreme range clamps - 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12 - 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps - 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps - 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps - 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current) - 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C) - 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands) - 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)

The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots. A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters. Combined with our proven bearing press design, the SBK-1 quickly and easily pushes the old bearing out of the linkage and reinstalls the new bearing precisely and squarely. - Magnetic back plate for easy configuration and assembly - Organized in a convenient storage case Includes extractor cups/drifts for the following ODs: - 16mm - 17mm - 19mm - 20.6mm - 21mm - 22mm - 22.3mm - 24mm - 26mm - 28mm - 28.6mm - 30mm - 32mm - 35mm Includes extractor studs and pilots for bearings with the following IDs: - 8.5–9mm - 10mm - 12mm - 12.7mm - 15mm - 17mm - 20mm NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.

Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

Park's Shop Screwdrivers are pro-quality tools featuring durable and precise heat-treated chrome-vanadium tips and shafts and dual-density handles for an excellent grip.

Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

This handy shop aid is ideal for sizing spokes, ball bearings, and crank cotters. To use, just hang the head of the spoke in the oblong hole and read its length on the scale. For crank cotters and ball bearings it works just like a gauge for drill bits. • Has both metric and fractional spoke length markings • Anodized aluminum with embossed markings to allow easy reading and long life

Park's Through-Axle Adapters quickly attach to their TS-2.2 or TS-2 Truing Stand so that you can securely hold and work on wheels with 12mm, 15mm, 20mm and 25mm through-axle hubs.

Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.

For wheels to perform properly, it's important that the rims be centered over the hubs. To check this, and to make precision adjustments, Park's Wheel Alignment Gauge (also called a dishing tool) is a must. It allows you to easily check centering on road, mountain and BMX wheels from 16 to 29 inches in diameter. It works with any hub width and its innovative design even allows it to be accurately used with the tire still on the wheel. The Wheel Alignment Gauge is a necessity for every wheelbuilder.

- PLUSH Suspension Oil 7wt - Formulated specifically for mountain bike suspensions - Designed for use in both forks and shocks - Reduces stiction and running friction - Consistent damping performance at any temperature - Proprietary additive system minimizes oxidation, corrosion and wear - Designed to protect seals and extend time between rebuilds

Elite Bleed Kits feature premium syringes and components designed for the professional mechanic. - Premium syringes offer enhanced clarity, improved durability, and ergonomic handles - Innovative quarter-turn valves make it easy to quickly open and close the bleed system - Straight and 90-degree clips keep the syringe upright to lend an extra hand to the technician - Includes bleed blocks for most popular 2-piston and 4-piston brake calipers - Includes adapter fittings for compatibility with SRAM, Avid, Formula, Hayes, and Hope disc brakes - Deluxe case keeps small parts organized and protected - Black seals provide easy identification for use with DOT fluid systems only

Jagwire's Pro Hydraulic Brake Line Cutter is a shop-quality tool that makes it quick and easy to precisely and cleanly cut hydraulic brake lines. With this fine hand-held tool you can cut brake lines on the workbench and on your bike, too.

The Finish Line Absorb-It Mat is the perfect way to keep any work area clean. Designed with special absorption fiber technology, the Absorb-It Mat absorbs and traps chain lubricants, cleaners, degreasers, brake fluid and hydraulic oils. The combination of absorption fibers and a leak-proof poly liner make the Absorb-It Mat perfect accessory when degreasing & lubricating bicycle chains. Use the Absorb-It on a work bench, under an automobile to catch leaking fluids, in a car trunk to prevent stains, in a chemical storage cabinets, or under a trainer to catch perspiration. The Absorb-It Mat comes in two different sizes: Small (48" X 18") and Large (60" X 36"). The 48" x 18" will absorb and trap up to 11L of fluids. The larger 60" x 36" will absorb and trap up to 2.5L of fluid. Both mats can be cut with a scissor to fit in custom areas.

Finish Line's Dry Lubricant with Teflon keeps your bike running silky-smooth rain or shine. It's very thin yet extremely durable thanks to its synthetic oils and Teflon particles. Great for your chain, cables, cleats and springs, its dry surface texture minimizes the accumulation of dirt and grit. Plus, it's biodegradable. - Great for dry, dirty and dusty environments. Attracts less grime and runs clean - Holds up well in moderately wet conditions - Can be used on derailleurs, shifters, cables and brake pivot points - Finish Line's most popular and versatile lubricant

Whether you're fine-tuning your new full-suspension rig or tuning a fork you've ridden for years, Finish Line's Max Suspension Spray is a pro-grade stiction-fighting stanchion lubricant that maximizes the performance of your suspension. It smooths suspensions that have become dry or dirty and restores full travel and eliminates noise, too. Use Max before rides to ensure maximum responsiveness over the smallest of bumps, and the longest possible travel over extreme terrain. And, use Max to break in new forks or bring old ones back to life. It also conditions and protects rubber seals and O-rings and improves the surface slip of coated stanchions. - Helps suspension forks run more smoothly and quietly - Made with polysiloxane and advanced fluoropolymers

Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

Finish Line Showroom Polish is made with Teflon fluoropolymer and uses DuPont Teflon Surface Protector technology. Provides a brilliant shine plus long term protection on all surfaces of a bicycle. 100% safe for all plastics, rubbers and carbon fiber parts.

Clean, polish and protect your prized ride with the advanced technology of Finish Line's Showroom Polish And Protectant. It restores and rejuvenates all surfaces and is safe for use on steel, aluminum, carbon fiber, titanium, plastic, rubber as well as clear coats. It dries to a clear hard film and helps keep your frame and components cleaner longer.

Showroom™ Polish & Protectant with Ceramic Technology delivers maximum luster, it repels water, and prevents grime buildup. Your bike and components will stay clean for longer intervals. Showroom is safe for use on clear coat, carbon fiber, aluminum, titanium, steel, chrome, and stainless steel. Simply spray on and let sit for 10 seconds. Then wipe off with a clean rag. Due to Showroom’s proprietary formulation there is no need to pre-wash the bike. Enjoy the shine! Showroom Polish & Protectant will: - Clean frames and components without a prewash - Protect the bicycle from water and perspiration - Prevent a buildup of grit and grime - Keep your bicycle looking new

Finish Line® Speed Degreaser™ is the fastest way to clean a bicycle drivetrain. Dry-degreasing technology requires no water rinsing as it evaporates rapidly after application to leave no residue. It's innovative turbo sprayer uses mechanical agitation to blast away contaminants from metal components. Speed™ is formulated with advanced solvents to quickly breakdown grease, grime, dust, and dirt. For most applications Speed™ requires no additional brushes or tools. Speed™ leaves no residue so lubricants can be applied to the chain immediately after application. • Dry-degreasing technology requires no water rinsing • Innovative turbo-sprayer blasts away contaminants • Advanced solvents breakdown grease and grime • Dries rapidly to leave no residue • Leaves bicycle chains clean and ready for fresh lubrication

- Slotted construction for securing Aerolite bladed spokes - Helps prevent spoke twisting while wheel building/truing - Red handle for 0.8-1.0mm spokes - Black handle for 1.0-1.3mm spokes

- Professional wrenches fit internal nipples on many deep section aero rims

Tools for working with DT Swiss spokes. - Special for stainless spokes

Developed for locking the nipple to the spoke during the wheel-building process, preventing the spoke-nipple connection from loosening. - Holds nipples in place but allows for up to 5 adjustments before compound breaks down - Use with light oil for a secure, re-trueable wheel or use by itself for a maximum bond - Developed in conjunction with Loctite - Includes two 10ml bottles

Securely stow a multi-tool, chain breaker, and master link in your fork’s steerer tube for quick and easy access when you need it. Securely stow your essential trail toolkit in your fork’s steerer tube with this clever integrated storage solution. The compression fitting replaces a traditional MTB fork's star nut and keeps an included multi-tool and more cleanly out of sight, yet always at the ready—and it doesn't require you to thread your fork! Product details - Easy tool access for quick trailside repairs - Bolted compression system securely holds tool and carrier - Compression install replaces the star nut fitting with no need to thread fork - Simple install with two bolt lengths and included spacers for customizing fit - Includes BITS Multi-Tool with hex keys, screwdriver, chain breaker, and storage for quick links - 2, 2.5, 3, 4, 5, 6, and 8mm hex along with T25 and flat-head screwdriver - Compatible with MTB forks with threadless headsets and non-carbon steerer tubes - Not compatible on forks with oval internal steerer tube shapes like the Fox 38

A compact multi-tool that is designed for integrated storage in compatible Trek road frames. Compact and easily stowed The BITS Integrated Multi-Tool is a compact multi-tool that is designed for clean, integrated storage into compatible Trek road bike frames. The small but smart design features hex tools from 2-8mm along with a T25 Torx, and flathead screwdriver. The ergonomic design makes the tool as easy to use as it is to carry. Product details - Designed for secure integrated storage in the new Domane with storage door - CNC-machined keys for lightweight durability - 2, 2.5, 3, 4, 5, 6, and 8mm hex along with T25 and flat-head screwdriver - Slim profile makes it easy to pack on any ride - Ultralight aluminum alloy design