Wheels

Ultra light bolt on thru axle, with a low profile 6mm head for Whisky forks and some others. See other manufacturers specifications for fitment questions. - Thread Length (mm): 12 - Thread Pitch: 1.5 - MT/CX: 125 x 15mm - MTB+: 135 x 15mm - Fat: 198 x 15mm - RD/CX: 120 x 12mm - Rear: 167 x 12mm

- Cold forged 304 stainless steel with rolled threads - Lightweight 2.0mm/1.7mm/2.0mm double-butted form - Nipples sold separately - 172g (32 spokes @ 262mm) - Bag of 50

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: Joytech, Joy U, KK 10mm x 1, rear - Compatible with 10mm x 1 axle - Cone Wrench Size: 15mm - Threads: 10mm x 1 - Diameter: 17.0mm - Length: 13.8mm - 1 cone per bag COMPATIBLE HUBS: - Joytech, Joy U, KK 10mm x 1, rear - Taiwanese rear hubs with 10mm x 1 axle

Wheels Manufacturing cones are precision machined to Shimano Ultegra or higher quality standards. This ensures that our cones fit correctly, run smoothly and have a long service life. - Fits: JoyTech, Joy U, KK 9mm x 1, front hub - Compatible with 9mm x 1 axle - Cone Wrench Size: 15mm - Threads: 9mm x 1 - Diameter: 15.0mm - Length: 12.8mm - 1 cone per bag - Note: O-ring / seal not included. COMPATIBLE HUBS: - JoyTech, Joy U, KK 9mm x 1, front hub - Taiwanese front hubs with 9mm x 1 axle

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

Our thru-axle kit comes with everything you need to mount most 12x142 thru-axle bikes on your KICKR SNAP indoor trainer. This accessory will work with all editions of the Wahoo KICKR SNAP. It includes the following: - Threaded axle spacer M12 x 1.75 Coarse - M12 x 1.5 Medium - M12 x 1.0 Fine - End Cap

Stan's No Tubes' Presta Removable Valve Core is a replacement valve core for Stan's No Tubes Presta valve stems and Presta valve equipped rim strips.

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

Shimano Nexus and Alfine Internally Geared Hub Cassette Joints - Shimano model # CJ-S700 - Does not include cable fixing bolt unit - OEM cassette joint unit for Alfine SG-S700

Build yourself a tough, no-nonsense rear wheel with Shimano's Deore Rear Hub. It features a quality cold-forged-aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's excellent double contact sealing to seal out dirt and water. The freehub boasts quick engagement for lightning fast acceleration and confidence when negotiating tricky technical sections. A quick-release skewer makes wheel installation and removal a breeze.

- Replacement rear wheel skewer. - Specifically designed for use with Saris trainers. - Can be used for both indoor and outdoor rides.

After years of mountain biking with thru-axles with bulky handles that seemed to strike every trailside obstacle, we needed a better option. Our Lightning Bolt-On thru axles offer a high-quality, simple, lightweight alternative to that bulky handle. Available in a range of sizes that fit both front and rear wheels on all types of thru-axle-equipped bikes. - Lightning is Better—Our front and rear Lightning Bolt-On axles offer a stronger, more durable, lower profile, and lighter weight option to replace your stock thru-axles. - Low Profile—No more bulky handles to strike trail obstacles or create wind drag. Aerodynamic design. - Light Weight—Our axles are internally bored to remove unnecessary material without compromising strength. - Easy to install—Our matching front and rear Lightning Bolt-On Axles require only a standard 6mm hex wrench for easy installation and removal. - Better Tolerances—Manufactured in the USA to the tightest tolerances using aerospace materials and CNC manufacturing. No longer will your axle loosen while riding. - The axle is precision CNC-machined in the USA from 7075 aluminum and hard-anodized for rugged durability. Our axles are built to the tightest standards in the industry. - No special tools required. Design allows for wheel installation and removal using your standard 6mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world.

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

Best value in quick-release disc wheels.

The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

Thru-Axle hub adapters allow the use of 100 mm front thru-axle hubs in 100 mm QR forks. -Allows the use of modern thru-axle wheels in forks designed for quick-release compatible hubs -100 mm front hub spacing only -CNC-machined AL-6061

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- Lighter, wider, stronger and more flat resistant - Ride Tuned – Smoother ride improves tracking, control, and reduces fatigue - Wide hookless bead dissipates impact energy and prevents pinch flats. - 30% increase in impact toughness, 60% more flat resistant - Optimized for 2.3-2.5" tires - 385g (27.5"), 405g (29") - Rim Construction: Carbon - Brake Type: Disc - Tire Type: Tubeless Ready

Replacement freewheel spoke protector, in various sizes for different freehub sizes. - Made of clear plastic - Fits around standard freewheel threads

- Extra security against theft - 5mm hex CrMo axle

DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these Center Lock disc hubs make rotor installation and removal super fast.

DT Swiss' 350 MTB hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, DT's legendary Ratchet System ensures precise engagement no matter how hard you stomp on the pedals. Plus, these Center Lock disc hubs make rotor installation and removal super fast.

Direct power meets simplicity—running smoothly day-in and day-out. The 350 hub was developed according to the credo: Reliability meets simplicity. The simultaneous engagement of the ratchets and the resulting large engagement area provide reliability. The plugged construction allows easy maintenance without the need for tools. Adaptation to different axle standards or modification of the engagement angle is also possible with just a few manual steps.

Aluminum Tubeless Presta Valve - MTB or Road

DT Champion 2.0 spokes cover the whole spectrum from reliable road wheels to MTB gravity wheels. - Threadless spoke blanks - Nipples sold separately

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

DT Swiss tubeless ready tape seals the rim for tubeless applications and also works well as rim tape for tube-type set ups. - Highly resistant adhesive tape works as a rim tape and airseal

Sleeved 25mm Enduro rim, ready for the rough. Let your muscles play on the uphills and switch to attack mode for the downhills. This is exactly what DT Swiss Enduro rims are made for. Each rim is a piece of high precision engineering and, thanks to the extremely resistant alloy, the E 512 can cope with the most demanding trails.

This welded, 30mm-wide E-MTB rim is the ideal all-rounder. When you head into the unknown, the HX 531 is the perfect choice with a 30mm internal width to support meaty tires. With an ideal position in the middle of the strength to weight to width range, it works with many tire sizes and is the ideal choice for all eMTB's meant to be ridden on proper MTB terrain.

Make it more aerodynamic – this nipple is hidden inside the rim. DT Hidden Nipples are designed for high-profile rims, in which the inverted design is essential for optimum precision. They are very light and hidden on the inside of the rim: perfectly suited for high aero wheels. The nipples will align perfectly due to their spherical contact surface. - Weight: 22g for 64 nipples

The buyer's choice for wheel builders looking to save weight. ProLock nipples contain a special adhesive compound (by Loctite) which is activated when a spoke is threaded into the nipple, forming a durable bond. - 32 nipples weigh approximately 30 grams

The reliable rim with an ideal price-to-performance ratio! The jack-of-all-trades of road rims: light, wide, and with an ideal price-to-performance ratio. The R 470 works perfectly with wide tires and will deliver many unforgettable rides on the road thanks to its reliability.

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening

When mounting a wheel quickly and safely, the RWS system is untouchable. It combines the fast mounting of a conventional quick release with the force and safety of a fitting. The high-precision toothing at the inside of the lever allows you to fully tighten the axle and perfectly position the lever. - Ratcheting system tightens skewers with turns rather than a cam - Lever can be rotated into an ideal position after tightening - Removable, plug-in lever design is streamlined and protects your RWS lever

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. - End Cap Included

- Designed to stabilize 15g spokes in most hub flanges - 1000-pack

DT Swiss Standard Front Quick Release Skewers. - Traditional cam-operated lever - Stainless steel shaft

DT Swiss Standard Rear Quick Release Skewers. - Traditional cam-operated lever - Stainless steel shaft

Light and wide—a 35mm-wide welded AM rim. Plus-size tires are great, and with the XM 521, they find their ideally matched counterpart. It offers all the support needed by the most aggressive of riders, yet it keeps the weight really low. This is important because big tires tempt you to goof around on the trails and any rider would rather spend their energy jumping off obstacles than wasting it dragging along extra weight. That's the XM 521: a rim ready to put smiles on riders' faces.

Upgrade or refresh your bike. - Original equipment replacement Bontrager AT-550 26 wheels - Bontrager AT-550 single wall, non-eyeletted rims - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Upgrade or refresh your bike. - Original equipment replacement Bontrager AT-550 26 wheels - Bontrager AT-550 single wall, non-eyeletted rims - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Upgrade or refresh your bike. - Bontrager AT-550 single wall, non-eyeletted rims - Does not include skewer, reflector, rim strip, valve, or owner's manual

High-quality replacement for Bontrager System Wheels.

High-quality replacement for Bontrager System Wheels.

• Original equipment Bontrager AT series rims • Double wall construction • Disc brake compatible • Pinned seam • Presta valve • Aluminum • 32 holes

There has never been a better time to upgrade to the feel and performance of carbon wheels. Aeolus Pro 3 TLR is a full carbon, tubeless-ready rim brake road wheel that balances durability, weight, and aerodynamics for pro-level performance that doesn’t break the bank. Bontrager started with a proven 35mm-depth shape and added the versatility of disc brake hubs to make a carbon road wheel available to all. Key features - D3 Dual Directional Design profile cuts drag at tire-leading and rim-leading edge - OCLV Pro carbon offers an optimized blend of weight, stiffness, and durability - Tubeless Ready (TLR) rims allow for quick transition to tubeless system - Stacked lacing alignment provides a better spoke bracing angle for a stiffer wheel - 35mm depth OCLV Carbon rim (27mm outer, 19.5mm inner width) DT Aerolite spokes and Alpina locking nipples - Center lock disc hubs with 12mm thru-axle front and rear, Bontrager 24 point engagement, 3 pawl hub - Compatible with Shimano 10/11 speed, SRAM 10/11 freehubs, axle swap kit available for quick release and 15mm - Includes TLR rim strip, TLR valve, valve core removal tool, and traditional rim strip

Upgrade or refresh your bike. - Original Equipment replacement Bontrager TLR wheels - Bontrager Approved double wall, non-eyeletted rims - Convert to tubeless with TLR rim strip and valve, sold separately - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Upgrade or refresh your bike. - Original Equipment replacement Bontrager TLR wheels - Bontrager Approved double wall, non-eyeletted rims - Convert to tubeless with TLR rim strip and valve, sold separately - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

Refresh your Bontrager wheels. Genuine replacement parts When it's time to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub bodies for Bontrager DCL-141Q hub - Compatible with Bontrager DCL-141Q - End cap not included

Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub body - Compatible with Bontrager Rapid Drive 108 hubs - Pawls and springs sold separately - Install 3 pawls/springs for 54 tooth engagement or 6 pawls springs for 108 tooth

Upgrade or refresh your Bontrager wheels. Genuine replacement parts Whether you're looking to upgrade to the newest and freshest drivetrain or simply hoping to refresh your trusty wheelset, Trek Genuine Replacement Parts have you covered. - Replacement freehub body - Compatible with Bontrager Rapid Drive 108 hubs - Pawls and springs sold separately - Requires Micro Spline specific end cap

These rim valves are crucial in upgrading your Tubeless Ready (TLR) Bontrager wheels to the next level of dependability and performance. Key features: - To be used exclusively with Bontrager Tubeless Ready (TLR) wheels - Required for Bontrager's Tubeless Ready (TLR) system setup - Removable valve core for easy sealant fill - Silver MTB valve is compatible with all Bontrager Mountain wheels except: Line XXX, Kovee XXX, and Line Pro 40 - Alloy Road Tubeless Rim Valve is compatible with all Bontrager alloy TLR road wheels

Upgrade or refresh your bike. When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. PRODUCT DETAILS - Original equipment replacement Bontrager Connection Disc wheels - Durable double-wall rim with 20mm internal, 26mm external width - Black rim graphics and spoke nipples - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. Upgrade or refresh your bike. - Original equipment replacement Bontrager Connection Disc wheels - Durable double-wall rim with 20mm internal, 26mm external width - Black rim graphics and spoke nipples - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed

When it's time to refresh your trusty bike, Trek Genuine Replacement Parts have you covered. Upgrade or refresh your bike. - Original equipment replacement Bontrager Connection Disc wheels - Durable double-wall rim with 20mm internal, 26mm external width - Black rim graphics and spoke nipples - Does not include skewer, reflector, rim strip, valve, or owner's manual - Wheels shipped as photographed